溧水潔鵬
 
解決方案-電子電器行業
鏈條輸送機

商品名稱:思科亞頂升移栽鏈條機
型  號:SK-DL-1000
機架材質:碳鋼
電機功率:2200W,速比:30:1,變頻調速
輸送介質:輸送鏈條

·思科亞裝配系列
·外形美觀大方,按鈕形象,操作簡單。
·電子、電氣元件、電器、塑料行業
   
功能特點:  
Conveying chain: c10b-2 straight plate double row chain, pitch P = 15.875mm.
輸送鏈條: C10B-2直板雙排鏈條,節距P=15.875mm。
Straight plate double row chain, pitch P = 15.875mm.
鏈條導向:有自潤滑作用的超高分子聚乙烯(UHMW)。
Machine body: the frame is made of 120x70x15 x4mm carbon steel profile, the welded leg is connected with the frame bolt, the M20 screw adjusting foot is fixed with the ground, and the height of the conveying surface is adjusted ± 25mm.
鏈條輸送機機體:機架為120x70X15 X4mm碳鋼型材,焊接式支腿與機架螺栓連接,M20螺桿調節腳與地面固定, 輸送面高度調節±25mm。
Guide fence: according to the actual requirements of the project, the guardrail can be adjusted and turned out.
鏈條輸送機導向護攔:根據項目實際要求布置,護欄可調式,外翻。
Driving device: intermediate driving mode, including a reduction motor, drive shaft assembly, drive sprocket group and motor base. The motor drives the drive shaft to rotate through the sprocket. It drives the c10b-2 double row conveyor chain through the sprocket at both ends of the drive shaft.
鏈條輸送機驅動裝置:中間驅動形式,包括一個減速電機、驅動軸組件、傳動鏈輪組和電機座。電機通過鏈輪帶動驅動軸轉動。它驅動軸兩端鏈輪傳動C10B-2雙排輸送鏈條。
Accessory device: photoelectric support and end stop plate.
附件裝置:光電支架及端部限位檔板。
Surface coating: derusting of legs, guardrails, frames and other parts by wire brush, sandpaper, acid pickling and degreasing, electrostatic spraying of epoxy resin powder and baking after phosphating, resin thickness between 60 μ M-90 μ M.
鏈條輸送機表面涂裝:支腿、護欄、機架等零件經鋼絲刷、砂紙等除銹,酸洗去油脂,磷化后表面靜電噴涂環氧樹脂粉末并烘烤,樹脂厚度在60μm-90μm之間。
Surface coating: derusting of legs, guardrails, frames and other parts by wire brush, sandpaper, acid pickling and degreasing, electrostatic spraying of epoxy resin powder and baking after phosphating, resin thickness between 60 μ M-90 μ M.
鏈條輸送機外購件配置:減速電機用SEW,鏈條用杭州東華,帶座軸承用TR,軸承用哈軸。
地址:安徽省馬鞍山雨山經濟開發區智能裝備產業園 電話:400-637-5237 手機:15555350699 Copyright ? 2013 - 2020 潔鵬企業 版權所有 蘇ICP備11049437號-1
永久电影三级在线观看,学长让我夹震蛋自慰给他看,脱内衣吃奶摸下面免费视频