溧水潔鵬
 
解決方案-自動化專機設備
輪胎成品輸送線

商品名稱:思科亞輪胎成品輸送線

型  號:SK-ZJ-L800
機架材質:碳鋼
電機功率:2200W,速比:25:1,變頻調速
輸送介質:輸送滾筒

·思科亞專機系列
·結構筒單,價格合理,輸送平穩,噪聲低的特點。
·機械、化工、非標定制設備,鈑金焊接件,激光加工件
   
功能特點:  
The tire of the vulcanizer is conveyed by the unpowered roller conveyor of the vulcanizer and directly falls on the trench line (horizontal roller conveyor), under which there is a tire stopper, and each tire dropping opening is equipped with a detection switch to prevent the tire stacking and stacking together. The end of the trench line of the vulcanizer is a climbing belt conveyor, and the climbing belt conveyor climbs to a height of 1 m above the ground, with 90 ° unpowered rear end butt joint. After the roller turning machine, it climbs to the top of the steel platform at the belt conveyor connecting the climbing, enters the buffer area and circulates through the combined turnover machine. The tire enters the input device through the turnover machine and then enters the rubber wool trimmer from the horizontal to the vertical; the tire carries out the manual rubber wool trimming on the rubber wool trimmer. After the rubber wool trimming is completed, the tire turns out the roller conveyor from the vertical to the belt conveyor. Then the belt conveyor and 90 ° turning conveyor enter the appearance inspection circulating conveyor line; on the appearance inspection conveyor line, conduct the appearance inspection manually (manually pull out the tire and place it on the universal ball platform for appearance inspection), manually put the unqualified tire into the lower layer of f-f line and transport it to the rework area, and manually transfer the unqualified tire measured by white tire into the lower layer of E-E line to the rework area. Domain, put the qualified tires on the upper layer of f-f line and circulate on the f-f and G-G circulation lines; manually load the tires into the car and put them into the car; manually push the tires into the car to the conveyor line before the automatic input device and position them; the tires on the tires into the car are put into the dynamic balance uniformity machine and put into the conveyor line for automatic detection; after the detection, the dynamic balance is even. There is a lifting conveyor at the outlet of the homogenizer. Through the layered function of the lifting conveyor, the class A and class B products of the tires are respectively transported to the conveyor line of the tire receiving and cage loading area, and finally to the tire receiving and cage loading area, and the unqualified products are directly offline; the qualified products are loaded into the cage and transported to the warehouse by forklift.
輪胎成品輸送線通過硫化機出胎無動力輥筒輸送機輸送直接落在地溝線上(橫向輥面輸送機),下方裝有擋胎器,每一個落胎口都裝有檢測開關,防止輪胎堆落疊加在一起,硫化機地溝線末端是爬坡皮帶輸送機,爬坡皮帶輸送機爬到地面1米高位置,后端對接90°無動力滾筒轉彎機,后在接爬坡皮帶輸送機爬坡到鋼平臺上方,進入到緩存區域通過合流翻板機循環,輪胎通過翻板機在進入投入裝置由平放轉為立式進入膠毛修剪機;輪胎在膠毛修剪機上進行人工修剪膠毛,修剪膠毛完成后,輪胎在立式轉出輥道由立式轉入皮帶輸送機,再經膠帶輸送機、90°轉彎輸送機進入外觀檢查循環輸送線;在外觀檢查輸送線上人工進行外觀檢查(人工將輪胎拉出放置在外觀檢測萬向球平臺上),人工將不合格輪胎放入F-F線下層輸送到返修區域,?人工將不合格輪胎需要白胎測得放入E-E線下層輸送到返修集中區域,將合格輪胎放入F-F線上層,在F-F、G-G循環線上循環;人工將輪胎裝入輪胎投入小車;由人工將輪胎投入小車推到自動投入裝置前的輸送線處并定位,輪胎投入小車上的輪胎被自動投入裝置投入到動平衡均勻性機投入輸送線上進行自動檢測,檢測完成后,動平衡均勻性機出口處設有升降輸送機,經過升降輸送機的分層作用,將輪胎的A級品、B級品分別輸送至收胎裝籠區輸送線上,最終輸送到收胎裝籠區,將不合格產品直接下線;合格產品裝入籠內,使用叉車運輸到庫房。
地址:安徽省馬鞍山雨山經濟開發區智能裝備產業園 電話:400-637-5237 手機:15555350699 Copyright ? 2013 - 2020 潔鵬企業 版權所有 蘇ICP備11049437號-1
永久电影三级在线观看,学长让我夹震蛋自慰给他看,脱内衣吃奶摸下面免费视频