溧水潔鵬
 
解決方案-自動化專機設備
輪胎輪轂輸送線

商品名稱:思科亞輪胎輪轂輸送線送機

型  號:SK-ZJ-LY600
機架材質:碳鋼
電機功率:2200W,速比:25:1,變頻調速
輸送介質:滾筒

·思科亞專機系列
·結構筒單,價格合理,輸送平穩,噪聲低的特點。
·機械、化工、非標定制設備,鈑金焊接件,激光加工件
   
功能特點:  
In the application of gravity roller conveyor, using open or steel cover can avoid increasing the friction of bearing. Although the application temperature of the bearing can be as high as 170 ℃, the service temperature of the steel shield bearing cannot exceed 100 ℃, because the shield cover will be deformed. When the temperature is outside the range of 0 ℃ ~ 65 ℃, special lubrication should be considered. In the case of higher temperature, the load interval of the conveyor belt should be increased, and the conveyor belt should move rapidly to reduce the heat absorption of the drum. And it's better to have the cooling device of the roller.
輪胎輪轂輸送線在重力式滾筒輸送機的應用中,使用開放式或鋼質遮蔽蓋可避免增加軸承的摩擦力。雖然軸承的應用溫度可高達170℃,但鋼質遮蔽式的軸承,使用溫度不能超過100℃,因為遮蔽蓋會變形。在0℃~65℃的范圍之外時,則需考慮到特別的潤滑問題。在較高溫度的使用場合,輸送帶負載的間隔要加大,并且快速移動,以減少滾筒熱量的吸收。而且最好有滾筒的散熱裝置。
The load capacity of the drum is determined by the load capacity of the bearing and the width of the drum. The load capacity of basic bearing is determined by empirical formula and experimental test. And it is rated by the conveyor with narrow width. If the width increases, the load capacity of the roller will decrease due to the deformation of the shaft. The load capacity of the gravity roller conveyor has a lot to do with the selected components, which depends on the combination of the electric roller, framework and support. Due to the different processing shapes, there are three assembly methods: direct pressing, crimping and forming. The assembly of the roller on the skeleton track can be higher or lower than the skeleton, depending on the application requirements. If the roller is lower than the skeleton track, the skeleton track can be used as the guide rail without installing another safety rail; however, if a wider load is used, it cannot be used because the load will interfere with the skeleton.
輪胎輪轂輸送線滾筒的負載能力是由軸承負載能力及滾筒的寬度決定。基本軸承負載能力是由經驗公式及實驗測試而定。而且是以寬度較窄的輸送機來額定,如寬度增加時,則因軸的變形致使滾筒的負載能力下降,重力式滾筒輸送機之負載能力與所選用組件有很大關系,依據電動滾筒、骨架、支架的組合方式而定。因加工形狀的不同有直壓式、卷曲式及成型式三種組裝方式,在骨架軌道上的滾筒組裝,可高于或低于骨架,完全視應用的需求而定,如滾筒低于骨架軌道,則骨架軌道即可當導軌用,不需另裝安全欄;但是如使用較寬的負載,因負載會與骨架干涉而無法使用。
地址:安徽省馬鞍山雨山經濟開發區智能裝備產業園 電話:400-637-5237 手機:15555350699 Copyright ? 2013 - 2020 潔鵬企業 版權所有 蘇ICP備11049437號-1
永久电影三级在线观看,学长让我夹震蛋自慰给他看,脱内衣吃奶摸下面免费视频